Announcement

Collapse
No announcement yet.

Extra gauges in place of the ashtray

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Extra gauges in place of the ashtray

    I wanted to fit a combined EGT / AFR / fuel pressure gauge, as well as an eboost2
    Both are 60mm round gauges and I didn't want to lose another centre vent...

    Decided to try and build a bolt in solution in the ashtray area (can be put back to standard if needed) Zeitronix ZT-2 fitted, hole prepared for the eboost.

    pretty happy with the results - out of eyeline too...


    Sent from my SM-G928F using Tapatalk

    Edit. really hate not being able to upload normal photos from the phone. Tapatalk is nasty and doesn't seem to keep it in the original orientation... also, only shows as thumbnail...
    Attached Files
    Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
    S2 Coupe... bit easier off the line...
    '03 ZX12-R daily hack.... lots of nice bolt ons...

  • #2
    Where you gonna put all your loose change now though

    Comment


    • #3
      nice. any details on the manufactring of the item?

      Comment


      • #4
        Loose change will now reside under my elbow in the centre part...
        Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
        S2 Coupe... bit easier off the line...
        '03 ZX12-R daily hack.... lots of nice bolt ons...

        Comment


        • #5
          Ah... manufacturing, I made it from 6mm moisture resistant MDF. aluminium brackets and bolted through the sides... you can't see any of the fixings. It's quite tricky to get it fitting nicely, with quite a lot of wiring behind....
          Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
          S2 Coupe... bit easier off the line...
          '03 ZX12-R daily hack.... lots of nice bolt ons...

          Comment


          • #6
            Originally posted by LHD_Kid
            Ah... manufacturing, I made it from 6mm moisture resistant MDF. aluminium brackets and bolted through the sides... you can't see any of the fixings. It's quite tricky to get it fitting nicely, with quite a lot of wiring behind....
            Piccies...

            Sent from my SM-G928F using Tapatalk

            Attached Files
            Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
            S2 Coupe... bit easier off the line...
            '03 ZX12-R daily hack.... lots of nice bolt ons...

            Comment


            • #7
              good old elbowgrease

              Comment

              Working...
              X