Outside temp bulbs

**Fat Audi 80** · 23 March 2007, 19:21

seek and you shall find...

404 Not Found

http://www.s2-audi.co.uk/tech_articles/outside_temp_display.htm

Cheers,

Steve.

**Crawford_S2** · 23 March 2007, 19:38

No need to take off the wheel though, just makes it easier.

Oh yeah, when you get the bulb can you get me one too

**Fat Audi 80** · 23 March 2007, 19:57

Be careful soldering them back in. I broke my Temp display board

Still on the look out for a second hand one as they are £65 new!

Cheers,

Steve.

**topsparky** · 23 March 2007, 20:07

Originally posted by Fat Audi 80

Be careful soldering them back in. I broke my Temp display board

Still on the look out for a second hand one as they are £65 new!

Cheers,

Steve.

check on german ebay there's usually a few on there

**~~Corey~~** · 23 March 2007, 21:06

be aware that there are 2 versions for the S2, one reads celcius and one reads fahrenheit. Plus the one fitted to the S6 is different again.

**Fat Audi 80** · 23 March 2007, 21:31

Thanks Corey...

**blown_vr6** · 23 March 2007, 21:40

Cheers Guys - ive ordered a few bits from Maplins - hopefully sort it next week

**dub007** · 24 March 2007, 03:35

Make sure that you use deslodering braid to remove the old bulb. I thought I could just melt the old solder and pull out the bulb. I ended up overheating the board by doing this and ended up needing to buy another one. I had never used that copper mesh before, but it makes the process extremely easy. Don’t try it without it.

**blown_vr6** · 24 March 2007, 04:07

I will cut the old legs off the existing bulb and solder directly onto those.

Outside temp bulbs

Outside temp bulbs

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment