I reckon making one out of a standard subframe from a mutilated coupe seat should work fine.
-
My seat came with a universal subframe, so i could bolt it straight to the floor but i don't wanna drill holes in the floor
I reckon making one out of a standard subframe from a mutilated coupe seat should work fine. -
Guest repliedCant some kind of frame be made from scratch guys, out of interest?
Are they that complex at the end of the day?
Not saying as in make an OEM type one, but something universall to suit the floor pan supplied with bracketry to suit or something?Leave a comment:
-
I thought that CS might be mistaken also, so i emailed Demon Tweeks. They never replied
I'm 5 minutes away from Leicester so could nip down if you think it's worth it. I am going to York tonight to see if my mate can weld me up a frame out of a standard subframe. Will update when it's done...Leave a comment:
-
one leg, i think the outside, is set too high, so the the frame must be dropped on one side.Leave a comment:
-
Recaro Subframes
Right, spoke to Capital Seating this morning and they mentioned that Recaro have made the Audi 80 SF discontinued (as we already knew). The guy I spoke to was really helpful and will contact Recaro to see what they can do. In the mean time I spoke to Demon Tweeks and they said, yes, no problems getting one... so I've ordered one from them and se what happens.
The other option is the mk.3 Golf subframes. Can anyone confirm whether the runners fit? There are 2 subframes, one for the sports range and one for the Ergo range and Pole Position, the differences being the height. CS have these subframes in stock and are located in Leicester... anyone nearby fancy popping down and seein gif they fit?
I'll update the thread when I find out if I've got one through DT, I'm 50/50 with it. Have to see if I get a call later on or not
Leave a comment: