You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Im looking to run some wiring this weekend so I can install and amp in the boot.
Does anyone have any advice on how to remove the seats? Or should I try and run the wires with seats in place?
You need to remove the trim pieces from the back of the seat runners. Then underneath at the front there is a small m5 bolt on the center runner that you remove, then pull the seat all the way forward with the seat adjuster held up and seat will slide out of rear runners and you can lift the seat out.
that is for non electric, for electric, move the seat back as far as possible, there are 2 13mm bolts holding it to the floor, un bolt, tilt back and remove electronic connections, slide the seat out the back way, (yes you need to remove the trim from the tracks just like with the manuals. The next step is box them up and ship the seats to me.
that is for non electric, for electric, move the seat back as far as possible, there are 2 13mm bolts holding it to the floor, un bolt, tilt back and remove electronic connections, slide the seat out the back way, (yes you need to remove the trim from the tracks just like with the manuals. The next step is box them up and ship the seats to me.
They should come out from the back of the runners, ie the clip or m5 bolt, once removed, allows the seat to go back far enough to come out - elec and manual.
Rears, they're a **** pig to remove! The bolts never want to come out!
that is for non electric, for electric, move the seat back as far as possible, there are 2 13mm bolts holding it to the floor, un bolt, tilt back and remove electronic connections, slide the seat out the back way, (yes you need to remove the trim from the tracks just like with the manuals. The next step is box them up and ship the seats to me.
Have another!
The Perfectionist
sigpic
Audi Class Concours winner Stoner Park 2014, ADI Concours D'Elegance Class Winner 2008, Runner up 2014. Winner, S2Forum Show'n'Shine Billing 2006 & 2008.
that is for non electric, for electric, move the seat back as far as possible, there are 2 13mm bolts holding it to the floor, un bolt, tilt back and remove electronic connections, slide the seat out the back way, (yes you need to remove the trim from the tracks just like with the manuals. The next step is box them up and ship the seats to me.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment