You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Greetings,
Recently had a few hot spots in the seat and now is cold. The leather version elements are obsolete but the cloth version are still available from tradition. Anyone fit a UrS cloth element into a UrS leather seat before with good results?
Brrrr...
The leather version, 4A0963555F, as you suggest Jeff is NLA in NAmerica and NLA at Audi Tradition.
I would guess that the cloth one draws fewer amps/is a lower wattage than the leather version because the leather would be more of an insulator than the jacquard cloth. On that basis, the cloth version would probably work fine with leather (but not necessarily the other way around).
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
Greetings,
Recently had a few hot spots in the seat and now is cold. The leather version elements are obsolete but the cloth version are still available from tradition. Anyone fit a UrS cloth element into a UrS leather seat before with good results?
Brrrr...
go junk yard, and get one from a newer audi, passenger side, call it a day
go junk yard, and get one from a newer audi, passenger side, call it a day
Doubt if that would work,even if the junk yard would allow you to destroy/dismantle the seat to harvest the heating element. The UrS4/S6 lower seat heating element is different because it (4A0963555F ) is designed to work with the segmented lower seat bottom.
Jeff: be aware that there is another lower heating element, at the rear (pun not intended): 4A0963555D
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant
There is only one element for the base - there are two different overall shapes depending if you have cloth or pleated the nappa leather.
The URS4 and URS6 ones are also slightly different but the same size & shape.
You can make the non-leather one work simply by carefully cutting the element foam/scrim to separate it into sections to suit the pleats.
Early B5 S4 is very similar and can be made to fit really easily also.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment