On my desk it didn't crashes but I think it's cause the N75 etc. is deactivated cause of the missing knock sensors...
I think it's some task for a long winter.
Thanks so far!
I think it's some task for a long winter.
Thanks so far!
code:00000023 push Acc |
code:000000XX muv A, Ram_73 - check if magic byte is set |
code:000000XX jz Code_End |
code:000000XX jbc SCON.0, Code_Next |
code:000000XX clr SCON.1 code:000000XX pop Acc Code_Next |
code:000000XX reti |
code:000000XX clr IEN0.4 |
Code_End code:000000XX pop Acc |
code:000000XX reti |
code:00001B06 mov DPTR, #0x1FF0 | ||
code:00001B09 clr A | ||
code:00001B0A movc A, @A+DPTR OR
|
||
code:00000000 clr SCON.0 Receiver interrupt |
code:00000000 push B ; B-Register |
code:00000000 clr C |
code:00000000 mov A, RAM_7E |
code:00000000 cjne A, 0xXX code_next -max number of transmitted bytes/var |
Code_next |
code:00000000 jc code_Continue |
code:00000000 cjne A, 0xFF, Code_Code_clr_IEN0.4 jump to end of transmit |
Code_Continue |
code:00000000 inc RAM_7E |
code:00000000 mov A, RAM_7E |
code:00000000 mov B, #2 ; B-Register |
code:00000000 mul AB |
code:00000000 pop B |
code:00000000 pop PSW - is not needed |
code:00000000 mov DPTR, #0x1XXX |
code:00000000 jmp @A+DPTR |
code:00000000 sjmp code_byte_2 )) not 1 |
end etc…. |
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment