You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
Question, how and where do i route the 12v sub power from the battery into the interior? Obviously it has to go through the dash, behind the glovebox (LHD).
what current are you drawing?
There is a spare grommet or two in the firewall under the fuse box. There are also some spare 30amp feeds you can tap into in the fuse box
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Im thinking about installing an ALPINE SWE-1000....its a active sub, 150w, not sure of teh current consumed so was going to go straight from the battery into the interior with a fuse directly at the +ve terminal.
IIRC P=IV so 150w / 12v = 12.5 amps?
If i was you i'd come out of one of the 30a feeds under the fuse board, use a fuse holder in the fuse box OE style, then run the cable along the drivers side under the carpet to the boot
Otherwise cut a slit in one of the spare grommets under the battery tray (RHD car and pull the cable through under the glove box and along the passenger side to the boot
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment