RS2 farb. S2 Fitting advice?

[FRED]

I'm just about to fit a RS2 farb and
drop links onto my Aby Coupe.

As I appear to be the last person in the world
to do this..... Any tips?

Going to support the car on stands and remove
the wheels for easy access.
Should I load up the suspention (i.e. wheels back on,
car back on ground) before I tighten everything up?
I'm thinking I should allow every thing to find it's position
before I tighten up, or am I being dim and its not required

Cheers, Grant

Fitted extreme HID's from Vagparts yesterday. WOW!!!

[mcandmar]

Yep thats good practice, put the weight on the wheels before clamping down the two mounts on the subframe.

Mark.

[dan_b]

I did mine on a ramp from underneath the car and it was a straight off and on job then. Took about 20mins.
Did the rear by scrabbling around on the floor under the car which was also a straight off and on job, minus a few bits of flesh on a few knuckles and about 45mins

[FRED]

Thanks for the advice gents. All fitted.
Took about an hour and certainly makes a
hell of a difference. Only downside is that it
has highlighted a knackered strut top mount....
Oh well I didn't have anything to do on Saturday
anyway!

Just got the brakes to upgrade and then I'll
have the car the way I want it and I can stop
with the mods.

[mcandmar]

"I can stop with the mods" Ha ha yeah right

Nice difference with the RS2 bar, have you got a whiteline to go with it yet :mischeif:

[FRED]

[QUOTE=mcandmar]"I can stop with the mods" Ha ha yeah right

It's a fair cop guv....

I probabely won't be happy 'till I get to RS2 spec, but this S2 was
supposed to be my "cheap" everyday car so I can keep the ur for
the weekends... at least that's what I told my wife.:mischeif:

Almost forgot, Whiteline on it's way...