You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
AUDI 80 CABRIOLET COUPE 4 CYLINDER POWER STEERING HOSE -- Will it fit?
The part number is the same apart from the s2 one being 8A2 422 893 E and the first one being 8A2 422 893C (so different letters at the rear of the part number)
s2 has "E" at end for rhd and the other has a "C" at the end.
Says on the ebay advert that its only for a 4 cyclinder engine, would this still fit anyone?
Just went to a local guy for this and he has done a great job by the looks of it. http://www.hopespare.com/ they have various places in the uk. £80 did it in an hour. Now its almost brand new. Now to fit and test.
hope you´re lucky because I did the same thing twice and it only lasted 3 years before leaking again the third time I ordered one from AT and payed 3x times the cost of the fixing but if it lasts at least 6 years it´s worth it as on top of the fixing I payed to have it removed and refited!
Oh no! sorry to hear! Though I think if you look closely he has totally replaced the main body - so it should hold up. thx for your comment though, That can be frustrating! :/
Probably was due to the grade of hose used. There are few different rates, depending on hydraulic pressure for the appication. Tractor hydraulics are a very high rate, up to 5,000 psi!
Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
Probably was due to the grade of hose used. There are few different rates, depending on hydraulic pressure for the appication. Tractor hydraulics are a very high rate, up to 5,000 psi!
Hey what do you mean by Tractor? is this the grade used by the s2 normally?
Hey what do you mean by Tractor? is this the grade used by the s2 normally?
No, I doubt it. I'm just suggesting why some rebuilt pipes might fail prematurely. I'm not sure what psi the S2 system runs at. Your new hose looks very well made and I doubt you will have any issues. It should have a BS number stamped on it. If you Google that you will find the rating. There are about 5 different grade hydraulic hoses for tractors.
Nothelle S2 Avant
Black Ur project
Silver Rs2 Project gone
Ocianic Ur project gone
S2 Coupe project gone
Urs6 plus project gone
PAS hose is a proprietary type, which damps the pressure oscillations. If you use generic hydraulic hose you will get a whining noise under load.
Hey yes I get this with the current pipe installed, as it was a temporary installation to get me back from Germany at the time.
I hope the new one wont make this sound, it looks very sturdy
I had the tube replaced by a new one by a hydraulic company and they re-used the terminals, as in yours I guess, the leaking was always where the terminals meet the hose!
Maybe my terminals where terminal and reusing it was never a good idea as they re-crimp it after removing and there is no time like the first time!
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
thx for your comment though, That can be frustrating! :/
Comment