Lowered S2 Avant and S8 18" problems?

[AndersS2]

Jamo,

as i said earlier, i run 15mm spacers, 40mm h&r springs and konis all round on the avus' and i havent got any rubbing at all. i only had som light touches inside the inne front -plastic-arch, but i suspect that is due to bumps/kerbs.
When on WOT the car almost hits the groud in the rear but it still don't rubb.

when writing all this, i may seem to recall my rear arches may be widened a few mm in order to get the old 19"s to fit.. hmm, will check it up with the previous owner later.

[BRY]

I don't have any scraping issues, I can't remember what spacers I have where, but I know that they are not the same front / back
Lowered on H&R S2 avant springs.

[AndersS2]

when writing all this, i may seem to recall my rear arches may be widened a few mm in order to get the old 19"s to fit.. hmm, will check it up with the previous owner later.

I do have widened/rolled arches at the rear!

[FITZY]

I'm running 8x18 RS6 reps on mine, et35, lowered on S2 H&r's with RS2 shocks and even fully loaded with a full tank and my extraordinarly heavy vibe sub box on board, rubbing has never been an issue.

[pixsaudisex2]

tyres can make a huge difference for example i had nankangs no rubbing brought some yokahammmmmmmmmas and they rub everywhere exactly the same size tyres as well ( but obviously no rim protectors on the nankangs is my findings) and cut down springs

[Jamo]

It seems my car sits lower than a car on H&R springs after comparing it to the Avant's

Interested to know if people think this product would help me cure my problem?

http://www.demon-tweeks.co.uk/produc...code=S/FSF1315

[Fat Audi 80]

I think it may well work but I also suspect that it will make the ride more harsh....

@ your Sig - true.

Hope you overcome your problems mate.

Cheers,

Steve.

[nigelm]

Spring gizmo

£25 for 1. I guess that's £100 for 4 if I recall my 'O' level maths. Seems a bit steep. You could put that towards different springs if yours are tired and sagging?

Nigelm

[Jamo]

£25 a pair, my springs are not sagging this would be to stop them compressing so much that the tyres touch the arch.

Price for new springs OEM or H&R is pure roberry.

[nigelm]

Another option

Pro-mounts would be a more expensive option - they raise the ride height by a vairable amount depending on whether you opt for 'race', 'road' or 'rally' versions. Corey could give you the exact figures. Obviously you'd get the benefit of arguably the best top mounts around also.

nigelm

[Jamo]

They would have no effect on this problem I'm aware of pro-mounts and their uses but for this problem it's not viable.