I finally found out where my vibration came from. It was the left driveshaft. Does anybody have a pic that shows what to be changed / and how? Couldn't find a D.I.Y
How to change driveshafts?
Collapse
X
-
Tags: None
-
No one ever did this ? Tried to Google it, by didn't found i DIY there either! Help med please!'10 A5 Coupè 2.0TFSI REVO
90 quattro
X- 91 S2 Coupè
467hp, 670nm! -
Front or rear driveshaft?
Search for wheel bearing replacement or similiar
once you have the hub removed you will then need a torx bit (I cant remember the size) to undo the inner driveshaft guibo bit . You will need to remove the protective metal cover to that before you can get access to the bolts iirc
Make sure the heads are as clean as possible and tap the torx bit in to be sure as you really DONT want to round one of them out.
Then refit new driveshaft (are you replacing CV joint at the same time?), grease the CV joint suitably, and redo the removal steps insuring you use only new main bolts.
Make sure they are to the correct torque which is on S2 central or S2-audi iirc
hthLast edited by s2dude; 30 July 2007, 18:27.Comment
-
Sorry, forgot to say; it's the front. it is only the outer driveshaft'10 A5 Coupè 2.0TFSI REVO
90 quattro
X- 91 S2 Coupè
467hp, 670nm!Comment
-
93 S2 Avant Parting
91 URQ RR
02 A4 tdi AvantComment
-
Thank you soo much
I love these sites!'10 A5 Coupè 2.0TFSI REVO
90 quattro
X- 91 S2 Coupè
467hp, 670nm!Comment
-
I always loosen the torx bolts on the inner joint while the car is on the ground/ramp or with an assistant holding it on the brakes... If you disconnect the outer joint then try to undo the inner joint then you will soon be swearing at the sky as its a ****** locking the driveshaft otherwise.
PaulPaul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
Comment
-
.
Hi
I found this thread using the search function.
I have just tried,albeit on my 2.0 16v ACE car,to change the nearside front driveshaft.
Can anyone tell me what bit I need to remove the bolts securing the inboard CV to the gearbox??
Cheers
Steve
Comment
-
Comment
Comment