Announcement

Collapse
No announcement yet.

Part numbers H&R springs S2 Coupe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Part numbers H&R springs S2 Coupe

    Can someone please give me the correct part numbers
    for ordering the H&R springs for the Coupe S2 on the front and rear .
    RS for ‘Rennsport’ - ‘Motorsport’ in German

  • #2
    ABY or 3B?
    91 S2 coupé - RIP
    98 S8 - Luxury barge

    Comment


    • #3
      Originally posted by s2_bo View Post
      ABY or 3B?
      the original suspension is 3b.
      RS for ‘Rennsport’ - ‘Motorsport’ in German

      Comment


      • #4
        Have a search in the forum, Iam pretty sure I made a thread about

        /Jonas
        Sleeper S2 Avant +450

        A6 Avant 2.7t Stage 3

        Audi S2 Coupe RS2'ed

        Comment


        • #5
          And here you go:
          http://www.s2forum.com/forum/showthr...ighlight=H%26R
          Sleeper S2 Avant +450

          A6 Avant 2.7t Stage 3

          Audi S2 Coupe RS2'ed

          Comment


          • #6
            not to hijack the thread but does anyone know if you can buy spring as single items rather than in pairs? I'm sure my right rear has sunk slightly, being the reason why the car sits at a slight angle. When i dropped that car off axle stands it was ok for a few days but seems to have returned to the slant again
            Cheers
            David
            sigpic

            1992 3b S2 Coupe

            Comment


            • #7
              Not sure as singles as I think that you'd have to do like shocks and buy a matched pair for the rear but i'm sure that they will be able to supply a pair for the rear.

              Comment


              • #8
                yeah thats fine, actually should be swapped in pairs thinking about it...
                sigpic

                1992 3b S2 Coupe

                Comment


                • #9
                  I bought some H&R springs yesterday for ABY Coupe, can only get them as cup kit now so they have to be bought singley anyway. Def best to buy a pair at least..not cheap tho, £56.00 each +VAT. Avant lots cheaper...

                  Comment


                  • #10
                    Quattro corner can source you pairs of springs. Got a quote for RS2 spec fronts earlier in the year. Was thinking of going a bit mental but Ben's experiences have made me think otherwise!

                    Fit fronts on the rear for a slightly raised **** and to get rid of the variable rate rear H&Rs. You should be able to dial out any handling alterrations wih the RARB upgrade . I'm not sure on the effects of varaible rate springs but I would have thought that they make the handling a bit less predicatable due to shaning relative grip more with load than linear springs... Maybe rears on the front would be better... haven't I been here before!
                    Last edited by Rusty; 30 October 2007, 21:00.
                    Cheers'en, AndyC
                    1994 ABY Coupe - Projekt Alpinweiss

                    Comment


                    • #11
                      never had any issues with my normal h&r rears so will replace like for like i think
                      sigpic

                      1992 3b S2 Coupe

                      Comment


                      • #12
                        i dont wont a hard track set up more a fast road
                        does H&R perform on both then ?
                        RS for ‘Rennsport’ - ‘Motorsport’ in German

                        Comment


                        • #13
                          great for the track, with bilsteins though they can be quite hard on the road if surface is poor. i like the setup 90% of the time, though b roads they are not good for IMO can get very jittering and the car doesnt settle much.
                          sigpic

                          1992 3b S2 Coupe

                          Comment

                          Working...
                          X