Who does poly bushes and ball joints for the UrS6?

**terrybullwon** · 19 February 2008, 17:49

Doubt any one made them as its not the sort of car that you would poly bush.

**Acidburn** · 19 February 2008, 17:50

Might be best to ask one of the companies they might knock something up from spares that could work?

**Animal Mother** · 19 February 2008, 17:52

Originally posted by terrybullwon

Doubt any one made them as its not the sort of car that you would polly bush.

Why not?

**iain1067** · 19 February 2008, 17:54

Most common ones to fail are on the front, if my memory is correct they are the ones that go through a wishbone where the anti roll bar bolts through, top mounts i suppose as well, mind you i chnaged my top mounts when i had an s6 couldn't find anything wrong with the ones i took off.

Rear end is quite complex again i did some bushes but frankly i think i wasted my money and time doing it. biggest improvement was shocks the fronts go off quite quickly i ended going for oem spec bilstein, previous to that i had koni's on an urs4 and found them too hard.

btw front shocks are easy to do if you have the audi tool no more than 20 mins per side.

iain

**terrybullwon** · 19 February 2008, 17:56

Originally posted by Animal Mother

Why not?

Its hardly a track car or a sports avant like the S2 or RS2 although it has the ummfff...

My friends have Evo's they love'em makes me sick as all there parts are off the shelf bolt on, Audi's lack behind on the tuning circle thats for sure

**Acidburn** · 19 February 2008, 17:57

Originally posted by Animal Mother

Why not?

yeah coffin carriers don't require any suspension for the stiff inside?

**Animal Mother** · 19 February 2008, 18:17

And ball joints.

**Acidburn** · 19 February 2008, 18:24

Originally posted by Animal Mother

And ball joints.

Afaik for every car there is only standard ball joints made to manufacturers specs?

What exactly are you trying to do, sort the ride out so it goes round corners or is this just for a suspension rebuild?

**Cullam3n** · 19 February 2008, 19:12

Not sure about your balljoints question? VAGParts do genuine as I'm sure you are well aware.

**AndyP** · 19 February 2008, 19:15

If it's the same as the UrS4 then the ball joint is built into the track control arm, these are available from ECP for about £100 each for Lemforder or £32ea for Ching chong chinese specials.

**yodasfro** · 19 February 2008, 20:04

Here you go http://www.addictmotorsport.com/index.html

Who does poly bushes and ball joints for the UrS6?

Who does poly bushes and ball joints for the UrS6?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment