upgrading the rs2 suspension

[lind4hl]

anything else then this i need?

034motorsport 19mm rarb
034motorsport jhm solid short shifter
034motorsport strut mount " track density"
034motorsport engine/transmission mounts "motorsport spec"
034 motorsport Mount, Diff Carrier Pair, B4/B5 "track density"
034motorsport rear diff mount poly
034 motorsport diff/ tranny mounts "track density"

k&w coilovers
toyo tr-1 tires
drilled discs
better pads, (suggestions?)
better brake fluid


delrin bushings overall

[Jamo]

Take the 034 engine mounts off your list they dont fit the RS2. Also consider Mance mounts over 034 ones, not much in it to be honest.

The 034 RARB is actually a Neuspeed 19mm S4 ARB so a local stockist maybe able to get one for you http://www.s2forum.com/forum/showthread.php?t=5214

Go for the H&R clubsport coilovers over the K&W

I would go powerflex bushes over the delrin as the delrin are rock f*cking hard!

[lind4hl]

Take the 034 engine mounts off your list they dont fit the RS2. Also consider Mance mounts over 034 ones, not much in it to be honest.

The 034 RARB is actually a Neuspeed 19mm S4 ARB so a local stockist maybe able to get one for you http://www.s2forum.com/forum/showthread.php?t=5214

Go for the H&R clubsport coilovers over the K&W

I would go powerflex bushes over the delrin as the delrin are rock f*cking hard!

we say like this then , i love track days so it must be thight and good,

19mm neuspeed arb (s4 rarb fit on rs2?) drop links where to buy?
powerflex bushes
h&r clubsport better for track?
engine/transmission/rear diff/subframe bushings, buy where?

toyo tr-1
drilled discks
better pads
better fluid

som cheap website in germany or europe where i can buy:

h&r clubsport
19mm rarb
bushings.

[A80Avant]

the neuspeed rarb i got from 034 it was on a better price
rear apicol diff mount is nice
gearbox mounts street density for me(not a track user!)

[lind4hl]

these things from 034 motorsport then?

19mm rarb
diff carier bushings "track density"
rear diff mount poly
poly snubber mount
2x transmisson mount
2x diff mount, (same bushings) "track density"


then h&r clubsport coils from?
powerflex bushings
drilled disks
better pads
toyo tr-1

[AndersS2]

these things from 034 motorsport then?

19mm rarb
diff carier bushings "track density"
rear diff mount poly
poly snubber mount
2x transmisson mount
2x diff mount, (same bushings) "track density"


then h&r clubsport coils from?
powerflex bushings
drilled disks
better pads
toyo tr-1

-I friend of mine got an 19mm neuspeed RARB from 034MS. I did not have the two adj holes (medium and/or hard), but only one hole making adjustment impossible. Dont know anymore around this subject tho..
I got mine straight from Neuspeed itself (Corey fixing it 2 years ago), and they had the two holes for adjusting.

-As for the coilovers, I notice KW also do a Clubsport kit now. Havent heard any experiences around it, But the H&R Clubsport is supposedly much more stiffer than a regualr H&R coilovers (from a trusted source). I have a set on mine, but not tested yet..

-Pads; Go for Ferrodo 2500/3000! Best street/trackday pads you can get to these special cars which we have.

-Disc: No drilled, but slotted is recomended if you like to play hard on the trackdays. Drilled usually cracks. Slotted dont.

-Tyres: Streetslicks (?) or what they are called provide MUCH more grip when you have all the other above upgrades. Be prepard to drive fast with them!

[europeanme]

-As for the coilovers, I notice KW also do a Clubsport kit now. Havent heard any experiences around it, But the H&R Clubsport is supposedly much more stiffer than a regualr H&R coilovers (from a trusted source). I have a set on mine, but not tested yet..

get on with it!!!?!?..

..

:mischeif: I am waiting for someone to post their experiences of the clubsport kit!!..

Mike

[lind4hl]

ferodo it will be, slotted, check!


i havnt find any shop for h&r´s

can anyone provide me with a website in europe that has rarb?

[europeanme]

i havnt find any shop for h&r´s

try these....http://www.dcdezign.com/cheapest/h_r...uspension.html

[lind4hl]

some other site where i can order now?

[AndersS2]

get on with it!!!?!?..

:mischeif: I am waiting for someone to post their experiences of the clubsport kit!!..

Mike

haha

There is 3 members off this forum which have the H&R sets allready raced in this weekend, so maybe they can post an feedback.


Lind4hl: Try tots.ch for the H&R's.
As with the neuspeed rarb, I dont know if you would need the extra adj.hole as once I got mine I put it on the stiffest at once, and there it have been since. But one thing is that it does matter a little where on the RARB that hole is, the closer to the bend of the bar, the stiffer it gets. Further away, sofer etc.. And yes, the S4 b5 kit fits the b4 (s2/rs2) rear subframe. Make sure you get the Neuspeed brackets too, or else cracked subframe may be a future problem.

[lind4hl]

tots.ch hasnt answer me on mail for months


somewhere elsa where i can buy neuspeed rarb and h&r´s in europe, didnt get the neuspeed fittings from 034...

[macspring]

Lind4hl

I got my rear Neuspeed ARB for my 95 B4 Avant from Corey in Quattronics and he fitted it there and then. Mine has three holes in it and it is set in the middle one and as mentioned in another thread it is a nice bit of kit that combined with an RS2 FARB makes the car corner as flat as you need for the road.

http://www.s2forum.com/forum/showthread.php?t=29280

Presumable also as per the other link to a 2004 thread you could try Awesome.

Whoever you get it from, I'd recommend it.

I know I sound like I work for Neuspeed - I don't, but it is just that "it does what it says on the tin". It's nice to get something that is better that OEM/Standard and that bolts up with no trouble, first time out of the box.

Thanks and kind regards.

[aesthetics]

with the 034 rear diff poly mount.....it is most likely too big for the aluminum bracket. So dont just try and press them in right away or you may end up cracking and breaking the aluminum bracket. I spent a good hour with a dremmel and grind stone carefully and slowly boring out the bracket. Then I put the mounts in the freezer for 30 min, had a friend torch the aluminum bracket for about 2 minutes...then i ran and got the mounts from the freezer and quickly pressed them in with a bench vice.

went in like butter with a nice sizzling sound

[anton]

jamo are the rs2 engine mounts differant to te ABY? as the new motorsport 034 mounts have ABY fitment too.

as for the spec, looks good to me, agree with Jamo about the top mounts tho, possibly 2bennett also?? they look good but haven't heard much about them. all 034 stuff i fount to be cheapest to order direct, tires i found to be cheaper in differant places depending on size. not rly sure on the rest....

Ant