As Smiley says,
N 100 874 03 is an M12 bolt too, only difference is in it's length, it's 2mm shorter than the NLA one, at BM12x1.5x74.
2mm makes no odds, the bolt goes a good bit through the other side of the nut when tightened up properly.
I can't be 100% sure on this as my info starts in 1992 and doesn't state either M12 or M14, but tightening torque says, 110nm and a further 90°
N 100 874 03 is an M12 bolt too, only difference is in it's length, it's 2mm shorter than the NLA one, at BM12x1.5x74.
2mm makes no odds, the bolt goes a good bit through the other side of the nut when tightened up properly.
I can't be 100% sure on this as my info starts in 1992 and doesn't state either M12 or M14, but tightening torque says, 110nm and a further 90°


Comment