UrS4 ARB upgrades

[martinjs]

Are there any? cant find anything documented?

[merlin's S4]

Not that I've seen but then the standard ARBs are pretty hefty anyhow.

[iain1067]

you tried whiteline i think they are from the usa

[martinjs]

They are from Australia, don't list anything for the C4 chassis

[iain1067]

What about the V8 engined cars or do they run the same arb's??

[martinjs]

Im not sure TBH

[Rusty]

You could try the dodgy VW trick of doubling up the ARBs. Could work well on the rear.

[saltinot]

Look to the avant for thicker roll bars. Avant front bars marked with white, not blue (26mm), are 28mm.

The rear ARB on the avant is also larger diameter.

V8 and I5 S4s share the same diameter bars.

[martinjs]

Are they different to the B5 S4's

[saltinot]

B5 is an entirely different animal altogether.

[martinjs]

The rear B5 ARB fits the S2 avant yes?

[saltinot]

Yes, it does.

In the rear only...... The B5 and the B4 saloon/estate share the same suspension geometry. While the part number vary in some cases, they can still be interchanged between the B4 and B5 chassis. BTDT

Maybe you were thinking that the urS might have something to offer for the B4 avant? If so, then it does not. However, the urS4/S6 avant does have thicker ARBs that can be used on the all C4 saloons.

Does that help explain it better?

[martinjs]

Ok thanks, guess i'll go looking for some avant bars then (i have a saloon)