Hi guys,
Ive run into some issues trying to refit the rear wishbones on my coupe.
Ive had the subframe and one of the suspension struts off, which has been converted to coilovers.
Im having trouble getting the wishbones to line up so I can bolt them in.
Ive tried it two ways now, wont go either way.
First was wish the wishbones bolted into the subframe, ball joints as far out of the wishbones as possible, but it just wont go into the hub carrier, the angle is ridiculous.
Second way was with the ball joint in the hubcarrier and the pinch bolt holding it in. The holes in the wishbones are about an inch too far outboard of the holes in the subframe, I cant push inboard because Im fighting against the drivehaft.
Anybody BTDT, got any tips?
Somebody in the southeast area willing to help out?
Much appreciated.
Kieron.
Ive run into some issues trying to refit the rear wishbones on my coupe.
Ive had the subframe and one of the suspension struts off, which has been converted to coilovers.
Im having trouble getting the wishbones to line up so I can bolt them in.
Ive tried it two ways now, wont go either way.
First was wish the wishbones bolted into the subframe, ball joints as far out of the wishbones as possible, but it just wont go into the hub carrier, the angle is ridiculous.
Second way was with the ball joint in the hubcarrier and the pinch bolt holding it in. The holes in the wishbones are about an inch too far outboard of the holes in the subframe, I cant push inboard because Im fighting against the drivehaft.
Anybody BTDT, got any tips?
Somebody in the southeast area willing to help out?
Much appreciated.
Kieron.


Comment