Solid front subframe mounts, The verdict !

[rj scotty]

Bang on !

Front end is now much tighter and the car appears to be more stable over bumps.

To be fair the 2 rear bushes had had it so not to difficult to remove the other 2 put up more of a fight. All good though even managed to paint the subframe whilst I was at it.

To sum up If your thinking of fitting a them do it !

cheers

rich

[bambridge]

Spink has got sum left, if he runs out i have just got some m10,s & m12,s back from Hard Anodising.

[Jonnybravo]

This is the sort of news I wanted to hear !

Bambridge don't forget to drop me that Pm when the avant ones are sorted

[bambridge]

This is the sort of news I wanted to hear !

Bambridge don't forget to drop me that Pm when the avant ones are sorted

PM Sent

[madpugger]

This is the sort of news I wanted to hear !

Bambridge don't forget to drop me that Pm when the avant ones are sorted

Me too!

[Jamo]

Has anyone got the size of the rear bushes for the Avant want a set of these but may get them made in nylon if someone could supply the dimensions

[Jamo]

RJ Scotty and difference to ride comfort noise?

[Flat on my back]

.

Swapped to a front set about a month ago...haven't noticed any worsening in noise or vibration, just better front end response.

Only on my 90 20v though...

[Rusty]

I've got a set of 034 offset ones coming, hoping that they will add steering weight and make handling a tad sharper too.

[Skull]

Has anyone got the size of the rear bushes for the Avant want a set of these but may get them made in nylon if someone could supply the dimensions

i have a set of brand new ones waiting to be fitted.

[bambridge]

I've got a set of 034 offset ones coming, hoping that they will add steering weight and make handling a tad sharper too.

Are they (alum) natural finish or hard anodised?? or the stainless ones,

how much??
including postage, taxes?

Regards
kev

[newt]

Natural aluminum finish.
You can check pricing and get shipping quotes here: http://www.034motorsport.com/product...roducts_id=711

[rj scotty]

RJ Scotty and difference to ride comfort noise?

As I said, over bumps car bounces around a lot less only slight down side is I get a little more transmission noise, only noticeable in first gear and I do mean slightly more.

cheers

rich

[rj scotty]

Swapped to a front set about a month ago...haven't noticed any worsening in noise or vibration, just better front end response.

Only on my 90 20v though...

Spot on with that description

[newsh]

I've got a set of 034 offset ones coming, hoping that they will add steering weight and make handling a tad sharper too.

So whats going on there? You offset the subframe forward to increase rake and therefore trail? Won't the engine move with it?