Power Flex or Super Flex bushes?

[SE_30]

I'm just wanting to know the difference between the two manufacturers of the poly bushes Power Flex and Super Flex, are the Super Flex bushes from a harder compound?. I know there is a price difference between the two but thats all

Cheers
Stuart

[Greg_S]

If you can use the superflex ones which are of a better design. I frequently have issues with my powerflex ones creeking over speed humps and had powerflex redesign the bushes 3 times but it still didnt solve the issues.

[SE_30]

See the car is not used very often so would I benefit from going the Super Flex route?
I mean as little as 3 - 4 times a year it will be driven.

Stuart

[Audi Parts Guru]

Superflex bushes are definitely a better quality bush, however Powerflex do appear to have a bigger range of bushes

[SE_30]

I spoke to a very up to speed woman at superflex who advised me on the bushes and what they had in stock, good job I was sat down when she told me the price of kitting the 90 out with a complete set inc rear diff bush, but as we have all learned we only get what we pay for.. cheers for the info

Stuart

[Error404]

Superflex are made in Australia by Superpro as far as I know, they are worth a look too, IIRc they do the whole lot except forged wishbone bushes, which AFAIK only poweflex do in PU.
Whatever you buy just be careful I had a set of superflex subframe bushes which had big splits in them so make sure you check them over before fitting

[SE_30]

Well after reading a few of the type 85 project's on here, a few wish they had gone the 5 stud route using S2 struts, wishbones and mix n match CV joints, what do I do now that's thrown a right spanner in the works..

Stuart