OEM strutbar retrofit - advices please

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Skull
    S2Forum Possessed
    • Mar 2004
    • 3506
    • Country: Slovenia

    #16
    it is the new brace that replaces the old one. it is the same bar the c4 uses btw...
    Audi Quattro WR

    Comment

    • Acidburn
      S2Forum Obsessed
      • Jun 2007
      • 13459
      • Country: United Kingdom

      #17
      Originally posted by mcandmar
      Curious, i havent seen that version of the brace bar before, most S2's have a box section bar similar to yours but without the cutouts at each end. Also have a round bar version here but i dont know what car it came off. Yours is nicer though..
      Afaik

      that above version is aby, round one with flat ends is 3b and the square ends i've only really seen on some v6s/20vs.

      Comment

      • chezz
        S2Forum Addict
        • Apr 2007
        • 440
        • Country: United Kingdom

        #18
        Originally posted by SkĂĽll
        welded on, cleaned, polished the burned color out, cleaned again, and on with the seam sealer





        I am enjoying this project, but I'll be brutally honest and tell you that this modification has not turned out as well as I expected!
        I think it would have looked better if you had inserted seam sealer between the gaps and then used filler to smooth it off and then spray it all up.
        the seam sealer looks like silicone sealer and if this is the case you willl have problems when you spray it.

        Comment

        • Skull
          S2Forum Possessed
          • Mar 2004
          • 3506
          • Country: Slovenia

          #19
          i agree with you that it doesent LOOK good, but look how audi did it... looks ugly too, and i wanted it to be ugly stock looking.
          Audi Quattro WR

          Comment

          • chezz
            S2Forum Addict
            • Apr 2007
            • 440
            • Country: United Kingdom

            #20
            If you are happy then thats all that matters Sealants are incredibly difficult to achieve a nice finish and I would employ the services of my brother in law to make a nice finish - He's a joiner and these lads can work wonders with the finish on silicone sealants...I think the secret lies in a wetting the solution with a bit spit!

            Comment

            • Skull
              S2Forum Possessed
              • Mar 2004
              • 3506
              • Country: Slovenia

              #21
              the stock look is more important to mee than a good finish. now on with a layer of filler and then the paint.
              Audi Quattro WR

              Comment

              • saltinot
                S2Forum Extremist
                • May 2004
                • 1946

                #22
                Auto body seam sealer is not silicone based and dries rock hard so I don't see it being a problem. It should look fine in the end.

                Things always look bad before they can look good!

                Comment

                • Mikes2
                  S2Forum Extremist
                  • Jul 2003
                  • 1704
                  • Country: Scotland

                  #23
                  Originally posted by Acidburn
                  Afaik

                  that above version is aby, round one with flat ends is 3b and the square ends i've only really seen on some v6s/20vs.
                  You can see a standard ABY setup here

                  Mike

                  http://www.s2-audi.co.uk

                  Comment

                  • Error404
                    Super Moderator
                    • Mar 2007
                    • 19789
                    • Country: United Kingdom

                    #24
                    looks good Rok, well done mate
                    Panthero Coupé quattro 20vt
                    Indigo ABY coupé
                    Imola B6 S4 Avant

                    Comment

                    • Mikes2
                      S2Forum Extremist
                      • Jul 2003
                      • 1704
                      • Country: Scotland

                      #25
                      somebody been editing posts in here ?

                      my link has gone
                      Mike

                      http://www.s2-audi.co.uk

                      Comment

                      Working...