URS6 suspension lowering kit

[martinjs]

Gary! Didn't know motocrossmad was you until you posted that unicom link above. We miss you and your excellent photos on the quattroworld (the migration point for those that left audiworld Original S cars). Hope things are going well for you.

Gary has sold it.

[urS6Tom]

I've got the H&R springs originally made for the 200 Q with B8 Bilsteins on mine and it works really well. Quite low but wicked on the track

I'm considering getting one of these 034 RARBs to stiffen up the back and try and stop it understeering. Anyone have any experience/thoughts on them?

http://www.034motorsport.com/chassis-components-audi-urs4s6-rear-sway-bar-kit-c4-s4-and-s6-p-20247.html

[UrS4boy]

I'm considering getting one of these 034 RARBs to stiffen up the back and try and stop it understeering. Anyone have any experience/thoughts on them?

http://www.034motorsport.com/chassis...6-p-20247.html

I believe that "034" RARB kit is actually an Apikol kit:

https://www.apikol.com/#Products,Suspension,121

There is good experience with the Apikol kit, definitely reduces understeer, making the car more neutral.

[JP]

I'm running Bilsteing B8's with H&R lowering springs. Looks about right height wise. B8's a tad too bumby for some country lanes but not overly so if you have good bushes. Did have to put caravan spring assisters on the back though As I carry big loads a lot of the time which has made the back sit a bit low. resolved by the spring assisters.

[HMS-S6]

I'm running Bilsteing B8's with H&R lowering springs. Looks about right height wise. B8's a tad too bumby for some country lanes but not overly so if you have good bushes. Did have to put caravan spring assisters on the back though As I carry big loads a lot of the time which has made the back sit a bit low. resolved by the spring assisters.

Do you have any photo's of yours on that set up please?