Hi guys!
I've got a '93 3B S2. Got it for 3 years, however, since it was full of bodykits, glassfiber and other "tuning" materials, I've been rebuilding it from the groud up as a fully original S2, minus the 3B engine. Fitted an AAN into it.
As it's near completion, i tried ordering some new shocks. Ordered three sets and none of them fit my car.
First i tried ordering them by selectring the car in a local pasts store's database. They were smaller. Those were Monroe MR257 43.6mm diameter, 37cm length.
Second i tried to order them by the car's VIN nr. Monroe MR269 arrived, no good, same as before.
Then i searched the web for shocks by dimension. Ordered Monroe MR315(48.5mmx350mm). These are for the S6 c4. They fit into the struts, but are too long for the springs and don't fit the wheel bearing housing.
So I've hit a wall... the dealers don't know what to order, nor they could give some advice as to where should i look.
Internal dimensions for the struts are 48.5mm diameter and 350mm length. I just need some stock shocks at the moment.
Got any ideas guys?
Thanks!
I've got a '93 3B S2. Got it for 3 years, however, since it was full of bodykits, glassfiber and other "tuning" materials, I've been rebuilding it from the groud up as a fully original S2, minus the 3B engine. Fitted an AAN into it.
As it's near completion, i tried ordering some new shocks. Ordered three sets and none of them fit my car.
First i tried ordering them by selectring the car in a local pasts store's database. They were smaller. Those were Monroe MR257 43.6mm diameter, 37cm length.
Second i tried to order them by the car's VIN nr. Monroe MR269 arrived, no good, same as before.
Then i searched the web for shocks by dimension. Ordered Monroe MR315(48.5mmx350mm). These are for the S6 c4. They fit into the struts, but are too long for the springs and don't fit the wheel bearing housing.
So I've hit a wall... the dealers don't know what to order, nor they could give some advice as to where should i look.
Internal dimensions for the struts are 48.5mm diameter and 350mm length. I just need some stock shocks at the moment.
Got any ideas guys?
Thanks!
Comment