Front subframe torque moments cq20v

[Error404]

Well, my experience is different

When you go 35nm + 90deg, you can continue turning the bolt before you hit 80nm. I am sure this is the stretch in the standard bolt. That's why I use 12.9s. I wonder why Audi changed to 12mm bolts and more tightening torque on the later cars?

[Tom_]

I have 10.9 bolts and today i was test the torque so i set up a 80Nm on the torque wrench and it clap immediately. So i move on 90Nm and it have a lot of room to clap it...So i think, that will be ok...I put it yesterday on Loctite, so i hope that will be no problem