I have been noticing this from my car.
Setup is a single vane pump after replacing the brake system to a vaccum servo.
The pump has been professionally refurbished a while back.
I have noticed recently that when trying to park the car and close to reaching the end points of the steering the wheel it becomes very hard and the pump I guess noisy.
I have checked the fluid level and tried to check for air in the system and it seems ok. I also had a leak recently through one of the hoses from the rack to the pump which was replaced with a good unit.
Is this possible that the pump is giving up?
Setup is a single vane pump after replacing the brake system to a vaccum servo.
The pump has been professionally refurbished a while back.
I have noticed recently that when trying to park the car and close to reaching the end points of the steering the wheel it becomes very hard and the pump I guess noisy.
I have checked the fluid level and tried to check for air in the system and it seems ok. I also had a leak recently through one of the hoses from the rack to the pump which was replaced with a good unit.
Is this possible that the pump is giving up?
if more rpm helps then the pump is too weak at idle.
lol
Comment