S2 struts any difference?

[Vorsprung durch Technik]

Can anyone tell me if there is any difference between front S2 Avant and front S2 coupe struts? The lower bolt holes are M14. cheers guys.

[bluequattro]

Same as far as I'm aware

[AndyP]

The avant ones are different, those ones you've just bought are no good to you, I'll give you £20 for them

[Vorsprung durch Technik]

The avant ones are different, those ones you've just bought are no good to you, I'll give you £20 for them

Yeah pull the other leg it's got bells on. These will do very nicely for my V6 avant.

[Vorsprung durch Technik]

And as Andy10v is sewing possible seeds of doubt this being S2 forum
with loads of gurus on here,would be nice if some of you would chime in.

[AndyP]

I thought they were the same, I'll check part numbers on ETKA.

[AndyP]

94 ABY coupe - 893 412 033E
94 ABY Avant - 895 412 033F

Not sure what the difference is, I still think they will fit

[Vorsprung durch Technik]

I thought they were the same, I'll check part numbers on ETKA.

I did try and check on vacate but it's down atm.

[Vorsprung durch Technik]

94 ABY coupe - 893 412 033E
94 ABY Avant - 895 412 033F

Not sure what the difference is, I still think they will fit

Thanks Andy . Thinking about it probably the spring? What do you think? Good find for me these and hoping will be perfect for sorting out the V6 with better S2 handling stuff. Slowly slowly catching the monkey.

[andy10v]

S2 coupe and S2 avant front struts are the same as far as I know, early cars can have smaller holes, but as long as you match them up you are good.

And as Andy10v is sewing possible seeds of doubt this being S2 forum
with loads of gurus on here,would be nice if some of you would chime in.

I have not even been here yet

I did try and check on vacate but it's down atm.

Use this instead of vagcat, it is much clearer

http://audi.7zap.com/en/rdw/

[andy10v]

Or did you mean springs and shock differences as well?

[Vorsprung durch Technik]

I have not even been here yet

Must be my age eagerness and not checking.

Sorry Andy,mix up between you both.

[Vorsprung durch Technik]

Or did you mean springs and shock differences as well?

Well it would be nice to know what i have/am getting,to coin a phrase "overthink it" no seriously it would be nice to know as the V6 is an avant so i'm thinking S2 avant will be slightly heavier duty due to load carrying ability.

The main thing is i have the 55mm diameter S2 tube and the later M14 bolt holes meaning it should all just bolt straight up on the V6. Thats the theory.