Cool the beans alright !
Koni STR.T - Huge disappointment
Collapse
X
-
Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
-
Nobody I know/have ever met would try to show the action of a shock (strut insert) in the way you have, i.e. effectively disconnected from the top of the strut, without restraint.
If you are complaining about the shock, didn't you try a push/pull on the shaft *BEFORE* you went to all that work to install it in the strut? That would make sense. Your "test" does not.
That is what I'm on about.
But all that said, let's drop it and move on. Nothing to see here (now) folks.
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avantComment
-
Yes I did, and they were fine. After installing and driving I noticed nose was diving and cats were hitting the floor. I've driven the car to show how soft they are, as you can seeI'm the videos. This was the last thing I wanted to do to be 100% they're shot before spending even more money and sending them off for testing.'93 Audi 100 Avant - R.I.P
'92 Audi UrS4 Avant - SOLD
'93 Audi UrS4 Avant
'15 Audi A7 quattro 3.0 TDIComment
-
Small update. "Initial dyno testing has found no fault with them so they are going back to the factory for engineer inspection."
Do not know how you test shock absorbers on a dyno (unless there is shock dyno
)
What would be my options if they come back and say they're filly functional?'93 Audi 100 Avant - R.I.P
'92 Audi UrS4 Avant - SOLD
'93 Audi UrS4 Avant
'15 Audi A7 quattro 3.0 TDIComment
-
There are shock dynos. They just sound way to soft by design.
Sent from my LG-H955 using TapatalkComment
-
I see. They're gas shocks so I shouldn't be able to push them in with one finger. Also, when I push them in, they do not come out properly, they're like catching. When I shake them I can hear knocking coming from inside the shock absorber. Oil inside them slosh around, sounds like water.'93 Audi 100 Avant - R.I.P
'92 Audi UrS4 Avant - SOLD
'93 Audi UrS4 Avant
'15 Audi A7 quattro 3.0 TDIComment
-
If they are soft by design, then it is just misleading. If I purchase shock absorbers for an S4 they should be as stiff as originals. My 200k boge were as soft as new konis.'93 Audi 100 Avant - R.I.P
'92 Audi UrS4 Avant - SOLD
'93 Audi UrS4 Avant
'15 Audi A7 quattro 3.0 TDIComment
-
Small update. "Initial dyno testing has found no fault with them so they are going back to the factory for engineer inspection."
Do not know how you test shock absorbers on a dyno (unless there is shock dyno
)
What would be my options if they come back and say they're filly functional?sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment

He's saved my *** many times
Comment