front arb

[Jamo]

LMFAO! lol, Mark are you planning anything for the rear of the avant or is this just for the coupe?
Cheers
Gav

Check the post by S2Avant for the Neuspeed RARB, it looks quality to be fair for the Avant boys.

[s2avant95M]

Check the post by S2Avant for the Neuspeed RARB, it looks quality to be fair for the Avant boys.

but at a price.

[Stick Insect]

All the spec's should be with me shortly. As soon as I get them I will post them here. The guy who is making them specializes in the manufacturer of springs and sprung bar etc.......and had done if for a good 20 years.
HTH for the mo

I went to see a company in Wiltshire who made them for high performance Morris Minors ( ) they just made them from 20mm mild steel!!!!!! .

I didn't bother with them!

The company in Sheffield is now a warehouse specialising in DHSS furniture and carpets. Sign of the times I'm afraid.....

I have seen additional anti roll bars added to supplement the original.

Is the 7A FARB the same as the s2 anyone know?

David

[Mikes2]

The 7A FARB is different from the 3B and ABY S2.

[Henka]

Sweeper... C'mon... Who did you say was using a S4 FARB???

S2 ABY Avant/Sedan: 26mm FARB
RS2:28mm FARB

S2 ABY Avant/Sedan: 12mm RARB
RS2: 16mm RARB


Hey Sweeper.. Interetsing stuff. If it was possible to use A4 style FARBs then you'd have cheap ARB's ranging from 27 to 31mm. The though has crossed my mind but it feels like you're gonna have to switch sides of the stuts.

[Henka]

Different, yes. But it's 26mm thick.

[Jamo]

All the spec's should be with me shortly. As soon as I get them I will post them here. The guy who is making them specializes in the manufacturer of springs and sprung bar etc.......and had done if for a good 20 years.
HTH for the mo

Any news on this mate?

[WabTheKing]

if anyone can give me a spec i use a company that does nothing but metal bending i can fax em through something to see if its feasable!!

[rotoryboy]

Any news on this mate?

Hang fire matey, will be a week or so. I'll post details ASAP [stupidbankholidayssmiley]

[Jamo]

O.K, just me being impatient as usual.

[rotoryboy]

Don't worry mate, I'm the same. I WANT IT NOW

[mcandmar]

Are you sure about that? I fitted an RS2 bar to my 7A and they were identical, except for the RS2 bar being 2mm thicker

The 7A FARB is different from the 3B and ABY S2.

[90quattrocoupe]

Are you sure about that? I fitted an RS2 bar to my 7A and they were identical, except for the RS2 bar being 2mm thicker

There is a difference between the early 7A coupe and those produced after 3/91. The early coupe had the front bar attached to the stamped arms. The later bar is attached at the strut matching the shape of the S2 and RS2 bar.

GreG W.

[mcandmar]

Ahh yes, i had forgotten about that

Mark.

[4WheelDrifter]

There is a difference between the early 7A coupe and those produced after 3/91. The early coupe had the front bar attached to the stamped arms. The later bar is attached at the strut matching the shape of the S2 and RS2 bar.

GreG W.

I thought the change to the 7A Coupé was in March 1990 (MY L). But I agree with the rest.