Gearboxes for 5++ hp

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Erikb
    S2Forum Maniac
    • Jul 2004
    • 648
    • Country: Netherlands

    #1

    Gearboxes for 5++ hp

    Hey all,

    Because I am collecting all parts for my performance upgrade, I was wondering which gearbox will be best to use. I am hoping to get over 500 hp, maybe even 600 hp. I have a 3b box at the moment but I think this one will not up to this task. So which one is best to use:
    - 3B
    - S2 ABY
    - RS2
    - S4
    - RS4
    - S6 (4,2 litre)
    etc.

    thanks,

    Erik
    Getting everything sorted out for my 5++ hp project
  • S2 Ant
    S2Forum Possessed
    • Jul 2003
    • 3682
    • Country: United Kingdom

    #2
    I know Jeffers uses an EDU box from a 2001 S4 and this seems to be taking his abuse fine at the moment.
    Ant

    2007 Mk5 Golf GTi, 3 door, DSG, REVO Stg 2 and other goodies
    2011 Kawasaki Z1000

    Comment

    • Henka
      S2Forum Maniac
      • Nov 2004
      • 585
      • Home: Sweden

      #3
      Personally, I'd go for a DGV from a A8. As strong as the Rs2 (wide first, flexible shafts!!!), lower 6th ratio (I don't know if that's good or bad...), prepped for gearbox cooling. Cheaper than most boxes too.

      Comment

      • jogi730
        S2Forum Fiend
        • Jun 2004
        • 2335
        • Country: United Kingdom

        #4
        A8 manual gearbox.... tell me more?
        CHris
        Audi 90 quattro (Typ 85)
        20v turbo conversion

        sigpic

        Comment

        • Henka
          S2Forum Maniac
          • Nov 2004
          • 585
          • Home: Sweden

          #5
          Uh? What's there to tell. Basically, it's a RS2 'box only better and cheaper.

          Comment

          • caterpillar
            S2Forum Fiend
            • Jun 2004
            • 2480

            #6
            DGV are from s8 :9/00-6/01(month and year)

            Comment

            • Erikb
              S2Forum Maniac
              • Jul 2004
              • 648
              • Country: Netherlands

              #7
              What about a s6, 4,2 litre gearbox. Is this any good. There is one going on ebay.de for 500 euro. It has 88000 km on it. It has the following code AEC CKF CMG and it is from 1995.

              Or has this a weak first gear.

              There is also a rs4 box for sale
              Getting everything sorted out for my 5++ hp project

              Comment

              • Erikb
                S2Forum Maniac
                • Jul 2004
                • 648
                • Country: Netherlands

                #8
                Besides that there is also a (GKB) EEY box for sale. Dont know form which model ist comes from. Its new and pretty expensive, start price 1800 euro. It says, in the advert, that is has a stronger 1st gear.
                Getting everything sorted out for my 5++ hp project

                Comment

                • Henka
                  S2Forum Maniac
                  • Nov 2004
                  • 585
                  • Home: Sweden

                  #9


                  I'd also like to say that there are two kinds of RS2 boxes. The early ones have the thin first gear. Yup, this goes against all sense... I've seen a box like that. There is a early and late build of 'em. Consult page above to ensure you don't buy yunk. Also, you really need to check through the whole page as it's not all that structured - the info is there, it's a gold mine, just be patient.

                  Comment

                  • Audi_CQ
                    S2Forum Maniac
                    • Mar 2004
                    • 940
                    • Country: Norway

                    #10


                    Hmmm too late.......

                    Comment

                    • ~Delta
                      S2Forum Maniac
                      • Apr 2005
                      • 797

                      #11
                      1991 Audi 100 quattro turbo box (016 Torsen 4.11:1)
                      1987 Audi Coupe quattro box (016 non - Torsen 4.11:1)

                      Both these boxes are way tougher than both 5 and 6 speed S2 units, the non Torsen more so.
                      Never show a fool a half built house.
                      Never underestimate the power of stupid people in large groups.

                      Life is like a **** sandwich
                      The more bread you have, the less **** you eat

                      Comment

                      • Billman
                        S2Forum Freak
                        • Nov 2004
                        • 4129

                        #12
                        @Henka

                        What is the Gearbox Letters for the A8 gearbox? Is it with torsen and a straight fit? Do you have this info?
                        Go Holset or Go RS4

                        Comment

                        • Erikb
                          S2Forum Maniac
                          • Jul 2004
                          • 648
                          • Country: Netherlands

                          #13
                          Cbn?
                          Getting everything sorted out for my 5++ hp project

                          Comment

                          • caterpillar
                            S2Forum Fiend
                            • Jun 2004
                            • 2480

                            #14
                            this:http://www.traderamotor.com/showObje...vaxlad_oljekyl

                            Comment

                            • Erikb
                              S2Forum Maniac
                              • Jul 2004
                              • 648
                              • Country: Netherlands

                              #15
                              okee, think i found a CET box, will this be the strongest box available?

                              http://cgi.ebay.de/AUDI-S4-S6-RS2-S2...QQcmdZViewItem
                              Getting everything sorted out for my 5++ hp project

                              Comment

                              Working...