Announcement

Collapse
No announcement yet.

RHD nearside rear diff bolt needed

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RHD nearside rear diff bolt needed

    just changing the rear diff mounts and on the nearside the nyloc has managed to strip the bolt...fantastic

    anyone happen to know where i could get a replacement or anyone here happen to have a new one kicking about they want to sell?

    Already know they arent available from the stealer...

    cheers
    David
    sigpic

    1992 3b S2 Coupe

  • #2
    What's the size, length and thread pitch?

    S2 Coupe 3B Project


    Ur quattro restoration

    S2 Avant

    Boost is the new rock and roll!
    sigpic

    Comment


    • #3
      N0105002 M10x110 with a standard pitch 17mm nyloc
      sigpic

      1992 3b S2 Coupe

      Comment


      • #4
        Ah, I have a couple left over from the rebuild of the Rs4 but they're M12.
        There's these on the bay if you need a 12.9 https://www.ebay.co.uk/itm/191353394399
        There's plenty of normal 8.8 high tensile at M10 x 110mm in hex head

        I have loads of M10 nylocs at work, I might have a long enough M10 bolt too
        Last edited by newsh; 2 September 2017, 23:23.

        S2 Coupe 3B Project


        Ur quattro restoration

        S2 Avant

        Boost is the new rock and roll!
        sigpic

        Comment


        • #5
          Yeah i sat on the pc and looked about and does seem there are a few sources from nut and bolt merchants so will grab a few to store lol

          Thought i would add the picture of the bolt for completeness. The m12 wouldnt get through the diff mount unfortunately.

          thanks for digging about...appreciate it John
          Attached Files
          sigpic

          1992 3b S2 Coupe

          Comment

          Working...
          X