Announcement

Collapse
No announcement yet.

Leanders Flywheel swap dead clutch issue

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Leanders Flywheel swap dead clutch issue

    Hi all
    We've swapped the Dual mass out for a Leanders flywheel and Sachs clutch setup and now sitting with no pedal action. Is it a straight swap or is a spacer required. 1992 urs4 with 01E box. Or is it just a bleed issue?

  • #2
    I havent heard of the leaders flywheel. When I changed my dual mass to a single mass on my ABY with Sachs clutch I had to remove the gearbox spacer on my s2 coupe
    Greg

    S2Forum.com Administrator & Webmaster

    '93 Coupe with a few tweeks

    Comment


    • #3
      I didn't have to make any changes when i installed my flywheel/clutch/pressure plate. It's just bolt on stuff. But what pressure plate do you use? I use Sachs "707" pressure plate

      Here is some more info: http://forums.quattroworld.com/s4s6/msgs/24612.phtml

      Comment

      Working...
      X