what clutch is the best knee friendly on UrS6?

[popdemonic]

I had the Stage3 southbend clutch but the clutch was having the dragging issue and slipped so I ordered the Sachs SRE Sintered afterward .it's holding great,slight juddering but finally after 2years,
I felt the pedal is way a bit too heavy for driving in town.I started to have a pain on left knee when driving under bad traffic.I bored the slave out from 22 to 24=5mm.it helped a bit but it's still way too heavy IMO.
what's the lighter clutch recommended for AAN +EFR7163 on E85 tuned?TIA.

[ManiacuV6]

I heard that a combo from RS4 B7 pressure plate and a zf engineering clutch disk is a win . So nice pedal feel .

[popdemonic]

anyone know can tell me if stock clutch is way much lighter than SRE pressure plate.I bought a very low miles stock DMFW +clutch set a couple years ago.i would like to swap it back if worth.

[K Simmonds]

The stock clutch is super light when brand new, they get heavier with age, when I fitted a new one to cardcrash's RS2 a couple of years back we though the hydraulics weren't bleed properly until we test drove it and realised it was all correct. Certainly a touch lighter than the SRE clutch I had fitted to my old S2 that will be going back into my re-shell project.

[Thecrispynoodle]

I fitted a 7A flywheel and Sachs performance organic clutch for B5 RS4. I can’t feel any difference in clutch from stock AAN - it is no heavier. Whether this will hold your power or not I don’t know.