Which clutch master cylinder

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rikki Kitto
    S2Forum Zealot
    • Feb 2010
    • 6276
    • Country: England

    #16

    Comment

    • Rikki Kitto
      S2Forum Zealot
      • Feb 2010
      • 6276
      • Country: England

      #17
      So now my footwell is full of fluid suppose I better stop faffin and change it

      Comment

      • steve briance
        S2Forum Extremist
        • Aug 2014
        • 1455
        • Country: United Kingdom

        #18
        If an Aby one is already fitted, why not save the 20 quid and swap the pushrod over from your faulty one to an available new 3b one? Did recently with an old saab that is currently on my drive. Clutch master cylinder dialed and is £187. Noticed that mk1 mini is virtually identical and for £45all I had to do was in circlip the narrow mini push rod and swap with old saab one which was identical in length and fitted the clutch pedal.

        Sounds like you need to do something as brake. Fluid is not nice stuff to be stepping on, it's quite slippy...

        Comment

        • newsh
          S2Forum Obsessed
          • Aug 2003
          • 16226
          • Country: United Kingdom

          #19
          Originally posted by steve briance
          If an Aby one is already fitted, why not save the 20 quid and swap the pushrod

          Sounds like you need to do something as brake. Fluid is not nice stuff to be stepping on, it's quite slippy...
          And it dissolves paint

          S2 Coupe 3B Project


          Ur quattro restoration

          S2 Avant

          Boost is the new rock and roll!
          sigpic

          Comment

          • Rikki Kitto
            S2Forum Zealot
            • Feb 2010
            • 6276
            • Country: England

            #20
            New carpet going in soon as it's done so will give it a good rinse make sure it's all off the floor pan, it's slippy as hell ya right

            Comment

            Working...