Sachs clutch - where to buy

[Rusty]

Yeah, I posted a link to that site yesterday. More expensive there than it is in the UK.

[Jamo]

Sachs part numbers:-

Pressure plate - 883082 999707
Sintered friction plate - 881861 999809
Organic friction plate - 881861 999802

• JKM Motor Services have quoted me £495+VAT for the organic item and £475 for the sintered item, delivery is £10. Thus between £550 and £600 ish
• I got a quote of about £500 from Helix for their race / rally clutch.
• Have emailed Clutchnet this eve, expect a reply next week.
• Aelred mentioned he can get a 3B one remanufactured for less than the prices above to any spec.

Loads of options but bloomin' expensive, guess you can't do without

Next decision is organic or sintered. I don't fancy a digital clutch for daily driving, then again I don't fancy one that slips... D'oh!

Looking like mr. Smith is the best option at the mo...

No problems with the Sintered for driveability, http://www.s2forum.com/forum/showpos...40&postcount=4

I have a Sintered in the stroker so will be able to report soon enough

[Rusty]

All good It's cheaper too

[aelred]

It may take a only a few starts, once the brain and left foot has adjusted to the new feel and engagemant of the synther one

[A80Avant]

hmm interesting. If single mass is good with driveability,then with the dual mass it will be slightly better as well. Of course if the Nm is quite high, flywheel will need to go single

[Rusty]

• JKM Motor Services have quoted me £495+VAT for the organic item and £475 for the sintered item, delivery is £10. Thus between £550 and £600 ish
• I got a quote of about £500 from Helix for their race / rally clutch.
• Have emailed Clutchnet this eve, expect a reply next week.
• Aelred mentioned he can get a 3B one remanufactured for less than the prices above to any spec.
• Kestrel have got back to me, they do a Kevlar clutch for c.£350. Not more details at this time but here's a linky.