3b 5-speed to 6-speed DSY ??

[AUDIS2avant]

Hi guys.
I have a m8 that have bought an 6-speed DSY gearbox for his 3b, can anyone helt with what parts i need as the mounts are a little diff then "std 6speed s2/rs2" gearboxes?

Regards

[AndyP]

Stu has fitted a DSY in his 3B, see here

http://www.s2forum.com/forum/showthread.php?t=23139&highlight=dsy&page=8

Post's 104 & 111.

[th.b.w.]

Hy, it is the same procedure as with the RS2 CGR Gearbox, only the oilcooler is different....

Thomas

P.S. I run the FDP (RS4 2,7t) gearbox, same as DSY....

[AUDIS2avant]

Cheers guys. Can anyone tell me which mounts to use? As the ones that are on it now are the wrong way arround lol

[peters2]

hey boys are restructuring to put together my s2. 3b engine with an s4 6 gears where to find the correct gearbox mountings.?

[th.b.w.]

Hy,

you can take the adu or aby ones and maschined an spacer under the left side, abut 50-60mm high , this works for me since 4 years...

2. reason is to change the front (Agregateträger, (sorry i don't know this in english)), i mean the thing who hold the wheels and frames together....

Thomas

[Jonas_R]

You should make the spacer Ø50 and the center hole should be Ø12, when I changed to my 6-speed ABY gearbox I made the spacer 35mm high.

If you dont make the spacer you need to change the subframe (forbro)

[Jonas_R]

Thomas:

So If you have a CGR gearbox on your 3B then a DSY gearbox should be a straight swap?

[peters2]

thanks for the help boys i try to make it fit thogther..... th.b.w thanks for you help...
og tak til jonas r fra danmark jeg har stadigvæk et par småting som jeg mangler svar på. kunne vi evt tag den over tlf hvis du vil smide dit tlf nr så kan jeg ringe dig op.

[Acidburn]

Thomas:

So If you have a CGR gearbox on your 3B then a DSY gearbox should be a straight swap?

I have a urq thats getting a dsy box, so if I use a 3b subframe that should be fine? Reason I ask is i've got both a 5 and 6 speed subframe and I need to decide which one to blast and coat.

[S2central.net]

@acidburn - would you be so kind to photograph the two different subframes and/or take measurements so I can understand better how a 5-speed (01A/3B or 016/UR) subframe differs from 6-speed (01E on ABY/ADU) ?

Do I understand correctly that some spacers are all that is required to make a 3B subframe work with 6-speed 01E ?

[Jonas_R]

Yup all you need is a spacer the is Ø50 with a Ø12 hole, I made mine 30mm high. It is only needed for the left side and then you can use the 3B subframe.

I have attached a drawing.

[S2central.net]

Cool Jonas - thanks for that.

[magarv]

@acidburn - would you be so kind to photograph the two different subframes and/or take measurements so I can understand better how a 5-speed (01A/3B or 016/UR) subframe differs from 6-speed (01E on ABY/ADU) ?

Take a look in my project thread page 3, post #42. Picture of the two subframes side by side

http://www.s2forum.com/forum/showthread.php?t=30017&page=3

[S2central.net]

Ahah - nice and obvious now !