Spec stage 3+ clutch capable of ..?

[euro_urs4]

Second thinking now if my spec stage 3+ will hold the power I'm looking for anyone have any experience or opinions on this? Would the clutch withhold a built aan running a hx40

[fish]

it will hold less than they promise.

[newsh]

Its ok on my 3B running a 3071.

[Rocco]

and perfect for me around more than 2 yars back, and now still perfect with 390cv & 644nm with RS2 Turbo with 2.0bar boost

[euro_urs4]

Thanks for the reply guys helped out alot

[Wheeljack]

A 3+ will NOT handle an maxed out HX40, which is capable of >550whp. It will be slipping excessively.

[euro_urs4]

A 3+ will NOT handle an maxed out HX40, which is capable of >550whp. It will be slipping excessively.

Yeah i figured that what do you guys think od the spec stage 5+ clutch?

[Audi_CQ]

3+ disc with 5+ pressure plate was OK for 580hp / 700nm @ wheels and is fine to use on the street. A bit harder pedal, but not to bad

[euro_urs4]

3+ disc with 5+ pressure plate was OK for 580hp / 700nm @ wheels and is fine to use on the street. A bit harder pedal, but not to bad

580 crank or wheel hp?, and how harsh is the stage 5 clutch compared to the 3+

[Audi_CQ]

580 crank or wheel hp?, and how harsh is the stage 5 clutch compared to the 3+

580 wheel hp on a mustang dyno.
Never used a "pure" stage 5, but I guess it is much "harsher" as the 3+ is as soft as a stock clutch. The 3+ / 5+ combo is a good compromise as there is no problem with slipping the clutch in normal driving. It's just harder on the left leg

[euro_urs4]

580 wheel hp on a mustang dyno.
Never used a "pure" stage 5, but I guess it is much "harsher" as the 3+ is as soft as a stock clutch. The 3+ / 5+ combo is a good compromise as there is no problem with slipping the clutch in normal driving. It's just harder on the left leg

very true