6speed 01e - maximum hosepower?

[QuattroFever]

Any way to tell if you have the flexible mainshaft? Other than bolting it onto 1000AWHP though it would be great fun!

I bought an rs2 cbr to replace my cgr that had a shot syncro. Had them side by side and they appeared identical. Maybe I had the flexi mainshaft on both? Or neither?

You get a bulge in the casing with the wider first gear so fairly obvious.

Is there something that can identify it in the number?

[Tom_]

caterpillar : So i can use for example a 01E from TDI,when the bolt pattern will be the same as 5 cylidner 7a

[speeding-g60]

^^^ yes.

[A1quattro]

01e box for sale

hi sorry to jump in , i have for sale a 2004 01e gearbox which came from a allroad quattro. i only wanted the diff from it 4.475 so in its place i have had a 4.1 [s2/rs2 ect ratio ] fitted , this is a very good box with closer gears being a tdi box, also forsale a rear diff complete and fitted with a quaife a.t.b l.s.d also 4.1 final drive £1000 plus postage ,no offers ,sorry. pm if interested

[caterpillar]

TOM@ that correct....you may use the tranny, from any car/enginecombo...they will fit the engine; but remember the ratio code, and some minor issue, like the speedsensor,/wire. clutchtype and flywheel, and propchafts,and linkage....

[Tom_]

caterpillar : Thanks a lot,and last question : where i can find that ratio code on tranny?That is same as a diff ratio ?

[caterpillar]

ratiocode att trannys; by the 2 upper boltholes in bellhousing; then you need ETKA to decode it....fx; AHA 12345, or CBL 23456..its stamped in
ratio code for diff; by the oildrainplugghole.... against the road.. stamped in fx;AEC or AEU.....
the ratio code are also, for the prod year and type of car....

[[RPM]]

Any way to tell if you have the flexible mainshaft? Other than bolting it onto 1000AWHP though it would be great fun!

Is there something that can identify it in the number?

anyone? I'm all

[|CL|NIKI]

I'm using 95' year CGR on a 1300kg Coupe with 3 disc sinter-metal Tilton and all wheel 360kw. It holds for now... Soon will find what will be with lunch...

[fr3nzy]

Hello,
Someone knows how much horsepower could the 6 speed manual transmission from Audi s8 d2 340hp hold?