better driveshaft ?

[Wiell]

always difflock and tension on the driveline.

starting rpm?

[fluk3]

oki about 6000 and there i make wheel spin, which was also meant the day

[fluk3]

and some engine spec

2.2

493 HP 574 Nm

sachs 4-plate clutch

[Wiell]

ok. what rims are you using and tyre dimension?

my spec for a good start i launch controll, starting rpm 4750 and about 0,5-0,7 in boost. i am using 16 inch bbs rims and 205/55 non studded wintertyres with about 1,2bar in tyre pressure.
learned that big and heavy rims kills the driveshafts and gear box.
have about 460hp in mine.
my car against a supra.

http://www.garaget.org/video/109875

[fluk3]

oki it looks like it works really well.

18 "rims oz ultraleggera 225/40 Michelin Pilot Sport 3

can not go below 18" due to my brakes

[diesel des]

You need to machine the rear hub carriers to take the larger bearings and hubs from the front this will let you run the larger diameter Cv

Any more info on this conversion? What exactly is needed. Just press hub apart. Have it machined for front wheel bearing. Use a front drive flange. Use front cv?

[Audi imsa racing]

Here you have stronger driveshafts, front and rear. bolt on!

http://hansenmotorsport.no/category.php?id_category=76

[diesel des]

These look great but very expensive. Is that 1250 pounds for a set?

Just thinking I could get some different bearing and cv joints and put them in the rear and would be good enough.

[Oddi78]

Is there any good new upgrades for driveshafts?

[SteveH]

Go to the S2Forum Facebook page. You will find them there or message Audrius. £350 per axle set

[Oddi78]

Not so easy to find, when can not write Audrius anywhere ?

[SteveH]

His Forum member name is Biturbo. Do a search for him.

[jogi730]

He has also appeared on Facebook stating that a new batch is being made
Audrius Bagdonavicius £350

[Biturbo]

Yes new been made and from now on all shafts comes powder coated

[Chris5044]

Yes new been made and from now on all shafts comes powder coated

This is awesome!! and I am interested!! but not just yet, -- after my engine rebuild / power upgrade, but first im getting s2 up to working well mode.