Custom driveshafts

[Jeffer]

Guys,

What's the best place who can make custom driveshafts?
thx

[quattro84]

http://www.fixittransmission.com

Available here for S2-RS2-S4: http://webshop.cp-service.se/en/135-drivaxlar

Perhaps a group buy?

[vcosmin]

Also it can be made in Hungary , dont know the price exactly but the axle itself seems to be strong

http://www.youtube.com/watch?v=5SYh0KMV2vE&feature=autoplay&list=UUwl1c2dnkWKWDpyKyK6kg9A&playnext=1

it uses some axles, from them, also i use the same, it holded till now.

[terrybullwon]

Drive link

http://www.driveshaft.co.uk/

[Jeffer]

http://www.fixittransmission.com

Available here for S2-RS2-S4: http://webshop.cp-service.se/en/135-drivaxlar

Perhaps a group buy?

Don't think a group buy would suffice. My shafts are a mix of S2 and UR. On the other hand, I think I can manage with a mix of 4 front S2 shafts....

[Wheeljack]

Don't think a group buy would suffice. My shafts are a mix of S2 and UR. On the other hand, I think I can manage with a mix of 4 front S2 shafts....

So does this mean you are running an 82mm bearing in the rear to fit front S2 shafts? I'm looking into possibly doing this to allow running 4 of the same axles on my build...with some spacers at the output flange on the long corners.

[speeding-g60]

over here in the USA, i have had great experience with A1-CVTech out of Canada....

holds my ~900BHP and low 9 sec 1/4 miles with some pretty hard launches just fine. 1.400 60' time is best on slicks.

and i shattered a rear diff once but not the axles.

[Jeffer]

Indeed it's identical front and rear. Thats because its a Sport Quattro setup. The hubs, bearings, housings are Sport Quattro. The CV joints are audi 100, with the nut on the outside, instead of the bolt. Audi S2/UR/CQ rear shafts fit in that.

[Biturbo]

Any one know price for that driveshafts?I need to

[fasterthenrs2]

dss.com they prices were not bad at all

[Rocco]

Don't think a group buy would suffice. My shafts are a mix of S2 and UR. On the other hand, I think I can manage with a mix of 4 front S2 shafts....

How much is " not bad"?