performance clutch for a audi 200

[micky]

hi i am looking for a clutch to fit my 1986 200 quattro it needs to handle 550 bhp
anybody know where in the uk i can get one . thanks oh it has a standard 5 speed box its not a duel mass

[here2learn]

i called the uk dietributor for spec clutches garage wif bits strange name

or call mrc jp said to speak to them for my future clutch needs

[micky]

i called the uk dietributor for spec clutches garage wif bits strange name

or call mrc jp said to speak to them for my future clutch needs

just tryed them at mrc and dont do one for it . they sed try 034 motorsport

[URquattroGus]

If you look at the Sachs clutch route (uprated pressure plate and paddel) then once using their website, you can order from a number of UK Suppliers.

I ordered mine from AMD Essex, I think Jabbasport are also Sachs suppliers.

Also, try and look at torque rating guidelines, not bhp.

[here2learn]

just find a manufacturer with the right grade of clutch then use their web page to find a uk distributor. helix and sachs can be special ordered through euro car parts and the like, as they deal with oe stuff normally. will have a lead but you dont have to deal with import jazz

[A1quattro]

helix

ring helix autosport ltd , direct thats what we do tel 01295 701076 much quicker than going threw someone else who will stick there bit [price] on

[caterpillar]

https://www.clutchnet.com

[micky]

i tryed sachs uk and they sed 385 1b feet ot torque ? i think 500 bhp would give more than that ?

what torque figure am i looking at for 500 bhp lets say ?

[here2learn]

bhp is a multiple of rpm and torque so i am sure if you found the formula you could work it backwards

[aronmatic2]

check this: http://www.s2forum.com/forum/showthr...=clutch+kit+s2

[quattro84]

bhp is a multiple of rpm and torque so i am sure if you found the formula you could work it backwards

Power [W] =2πn[rpm]/60*Torque [N*m]

So, take engine rpm and divide by 60 [rev/s]
Multiply by 2 times pi (6.28)
Multiply by Torque [N*m]
Divide by 1000 to convert to [kW]
Mulitply by1.34 for [bhp]

[Laaf]

It's fitted a Sachs 707 pressure plate with a SRE 8 pucked sintered friction plate on my 4000CS with engine from a 200 20V quattro fitted to the original 016 gearbox.

[micky]

found these @ 034 motosport http://www.034motorsport.com/product_info.php?products_id=587{43}118 any problems with 034 ? some of you have had problems whats your thoughts

[spink]

which flywheel are you using?

[micky]

which flywheel are you using?

Standard one for the mc engine