a mirror and a torch i think
Stuck in 2nd gear... what to do?
Collapse
X
-
-
easiest thing to do is what I suggested to see if your shifter is still connected to the rest of the linkage and if that its still working as it should. That would show you if that its the 13mm at the bottom of the shifter thats an issue or if its further forward than that.Comment
-
under the car you will find the linkage( spline) it MAY have gone bad( upon the gearbox, but under the car)....if not.. the gearbox are gone( sprag and shift mecanisne inside) i have a audi box with the sprag and syncringe are welded together...( fricsion welded) ive tryed with a BIG hammer to got thes part separeted, no chance.....Comment
-
-
Hope it is the linkage and not the box. Either way, as you say it is bound to be a pain to even look at on these cars.
I just give mine to an experienced mechanic and keep my fingers crossed. Worked so far but looking forward to a bill of thousands at some point. Gotta be worth it though.Comment
-
Thanks but his thread says sold pending payment.
I've made some inquiries about gearboxes but ultimately I'm going to wait on the diagnosis next Wednesday. I know there's going to be a lot of labour involved in getting into the gearbox to see what's wrong but it doesn't seem likely that something catastrophic has happenedComment
-
I think it's either going to be linkage or selector forks. Gonna be costly but at least the car isn't fecked!Hope it is the linkage and not the box. Either way, as you say it is bound to be a pain to even look at on these cars.
I just give mine to an experienced mechanic and keep my fingers crossed. Worked so far but looking forward to a bill of thousands at some point. Gotta be worth it though.Comment
Comment