You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
it depent on the tranny verson you will use.... the driveshafts are a kit; you may have the innerunit and outer unit off, and change the center as you like...the 6 tr trannys, may need 2 of the right hand shafts.. if im correkt
According to my research;
The inner joint can come from basicly any Audi from the time, even som VW
The outer joint can ofc be S2, from a V6, or from the 20v (38 splines)
My problem was to find an appropriate axel. Since the standard axel wont fit the S2 joint, and the MC2 one is way to long. I thought that bolting a whole S2-shaft in would be the easiest.
But I havent taken off the standard shafts yet, so I don't know the difference
According to my research;
The inner joint can come from basicly any Audi from the time, even som VW ; correct
The outer joint can ofc be S2, from a V6, or from the 20v (38 splines) ; jepp
ok.. its 016 tranny 5tr... and the innerhubs will fit from a audi a6 ( 115mm dia too) there are MANY combos with the propchafts.. the exackt mershure for your car... have the biggest/ thickest parts if you can... ive even use the mobils xhp222 grease in ( blue coulored)
Is Your standard coupe - typ89?
If I'm not mistaken, there is an outer CV-joint which could be applied with Your shafts and S2 hubs: 4A0 498 099 J. That might be helpful in case, You attach Your inner CV-s to the 016 tranny (or find some solution).
Some kind of similar task is in front of one guy, i know. He wants to have front hubs from t89/B3/B4 on FWD t85 with 016 tranny. We have not found yet if it is possible to have bolt-on t89/B3/B4 shafts with inner CV-s on 016...
Is Your standard coupe - typ89? If I'm not mistaken, there is an outer CV-joint which could be applied with Your shafts and S2 hubs: 4A0 498 099 J. That might be helpful in case, You attach Your inner CV-s to the 016 tranny (or find some solution).
Some kind of similar task is in front of one guy, i know. He wants to have front hubs from t89/B3/B4 on FWD t85 with 016 tranny. We have not found yet if it is possible to have bolt-on t89/B3/B4 shafts with inner CV-s on 016...
THE MAN WITH THE ANSWER!
He is correct, those joints can be found on the late 100/early A6 and does have an outer 38 splines and an inner 30(same as the 2.3), they even have the same overall diameter(59,5mm) as the S2.
And since the inner joints already fit the tranny, i just need to swap the outer joints.
Frankly speaking, It was not my idea at all. I was told about that on this forum a couple of weeks ago.
I have bought one CV-joint GKN-Spidan 22541 but did not try to install this all on my car yet.
Frankly speaking, It was not my idea at all. I was told about that on this forum a couple of weeks ago.
I have bought one CV-joint GKN-Spidan 22541 but did not try to install this all on my car yet.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment