Have removed the 6 allen bolts. Have tried whacking with a rubber mallet and all ive managed to move is the cap. I have tried pulling the diff backwards . But it wont budge. Everything else is removed . i.e subframe ,driveshafts all pipes and mountings. Any tips please. Ive got the diff on a trolley jack and rear of propshaft is supported on an axle stand.
-
-
You're not hitting it hard enough!
If it's never been off before it will be stubbon.sigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racer -
Comment
-
You need to shock it to break it loose.
**** it harder!Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stockComment
-
Big hammer, not a rubber one.Comment
-
Big hammer but with a piece of wood between the hammer and propshaft end.Comment
-
Thanks all. BIG hammer it was .
Comment
Comment