01e centre diff

[A1quattro]

thanks again james

[G60Rallye]

Remember you wont be able to handbrake the car with a welded centre which might not be the best on some tight corners?

[Audi_CQ]

for several years ive been running with a modded 01e t2 centre diff done by strasis engineering ,, prospered sale a t3 diff which has been modded to fit the 01e box , are these a better diff will they give more rear biass than what I currently have , what I want is a diff that gives 60 rear /40 front most the time , the torson seem to be to much power to front 99% of the time . has any one fitted another type diff in centre , maybe the Subaru adjustable bias diff

I've been running the Prospeed T3 40/60 setup in my O1E for a couple of years. It works great and make the car more oversteered under power on corner exit.

[A1QSHIP]

Are the T3 torsens needed for the Prospeed t3 40/60 01e setups found in any other transmissions? I have a broken automatic transmission & am wondering about this.

[goodall]

http://www.s2forum.com/forum/showthread.php?t=26488

[A1quattro]

as I am having the front l .s .d set up to give a bit more lock on acceleration I think for now will stick with the strasis centre diff , as I do like to use the hand brake , and with the tighter front hopefully it wont spin up a wheel from now on

[A1quattro]

spoke to racing transmissions today , they checked the preload on diff and there isn't any , no wounder it felt like a normal open diff. jhono going to make the parts to fit and set the the diff at 30n/m preload , is this good for front ?, I don't want it to give me loads of understeer . ive no idear whats it should be set at , has anyone on forum got any experience setting front diffs up on 4wd car

[terrybullwon]

Ray

Trust Johno tell him what you want and it will happen he knows what he's up to!

He set mine up and I have no compaints it's grippy as ****!

[A1quattro]

cool , have you got any carbon propshafts that you would sale to me yet

[terrybullwon]

Send me a email Ray

James@jmdmotorsport.com

[A1quattro]

pm sent james