clutch question

[A1quattro]

I run a 01A flywheel with 01E gearbox no spacer plate between box and engine will a rs2 clutch fit onto my set up or is the pressure plate /cover to fat

[Kieron20V]

I think there is a photo on the forum somewhere with all clutch/ flywheel combos and their associated stack heights.
I think rs2 clutch and single mass flywheel you should be ok, you run into trouble trying to run a dual mass and full height pressure plate. AAN uses a dual mass flywheel with a lower profile pressure plate. Safest bet would be to use one of these, or an updated version if you need rs2 torque capacity.

[A1quattro]

hi how are things going, im going to take a trip up to helix tmw with gearbox and old clutch

[Thuppu]

Clutch question II

I have an AAN Fidanza flywheel with an SRE 754 pressure plate and sinter disc. Can I use this setup with an 01A transmission?

[Horsty]

don't know if it works with the tranny, but keep in mind that you have to rebalance the fidanza flywheel!

[Thuppu]

Why rebalance?