4x108 to 5-stud.

[John.]

Can anybody tell me what I'll need to convert my B3 CQ from 4x108 hubs to S2 5-stud ?

Cheers.

[Ruffiano]

S2 hubs is the simplest way.

is your car a quattro?

[quattro-nick]

ask gavs20v here on the forum,he had some converted 4x108 to 5x112 for sale a while ago

[John.]

S2 hubs is the simplest way.

is your car a quattro?

So just the the hub!
Yes, quattro.

[John.]

ask gavs20v here on the forum,he had some converted 4x108 to 5x112 for sale a while ago

[Ruffiano]

I used URS4/6 hubs, machined 5mm off of them:



Pressed into the front hubs. stock bearing and all:



for the rears:


B5 a4 quattro hubs:



again, stock bearings and all stock axles from my b3 coupe

[gavs20v]

Cheers
Still have these available

Gav

[Error404]

S2 hubs are the way to go if you can. As above there are other, cheaper ways but they do involve faffing about with caliper spacers etc as the hub offsets are different.

[varia]

S2 hubs are the way to go if you can. As above there are other, cheaper ways but they do involve faffing about with caliper spacers etc as the hub offsets are different.

i have original s2 hubs, but still had to use spacer for my brakes

[John.]

I hear all the above, mis-match disc to caliper carrier spacing was on my mind........obviously I'll need 4 bearings as well.

I'd rather go the S2 hub route.

[Vorsprung durch Technik]

What wheels have you in mind and are you going S2 front bumper?

[John.]

What wheels have you in mind and are you going S2 front bumper?

Something 16" I think, not 100% sure I'll do it or not.
No to the bumper.

[Error404]

i have original s2 hubs, but still had to use spacer for my brakes

I guess you are not using S2 discs then