Audi 200 20V Turbo 6 speed gearbox swap

[Pirvu Eugen]

I have another project started involving an 200 quattro avant.
I want to fit the 6 speed gearbox to it...but i dont know what gearbox mounts, subframe, driveshafts..etc i need.
Somebody has some ideas about this conversion?
Thank You!
All the best!
Eugen

[domas]

welll it must have been documended somewhere before but keep in mind that you will need a new shifter linkage as well.

[Pirvu Eugen]

Thank you Domas!
I have the gear lever with all the parts needed. 01E gearbox. But I don't know what transmission mounts I need for the 200 subframe..or I need to change that too?

[domas]

http://www.motorgeek.com/viewtopic.php?f=15&t=7020
you will need some v8 manual stuff
just google around: https://www.google.com/search?q=audi...utf-8&oe=utf-8
http://forums.quattroworld.com/s4s6/msgs/305847.phtml

Are you by any chance interested in selling your oem 20v linkeage to me if it has zero play in it?

[Pirvu Eugen]

Thank you Domas!
Friday I will take the linkage out.
You pay the shipment. I don't need. I have the complete linkage new from Audi.
All the best!
Eugen
Send me an PM with your address.

[domas]

you've got a pm

[sailaz]

But I don't know what transmission mounts I need for the 200 subframe..or I need to change that too?

custom made
or if you change to V8 6-speed manual subframe then mounts from that 6-speed manual, which is very unlikely realistic option ...

[Pirvu Eugen]

Hmmm!! Not great news! I have an V8 5 speed manual subframe.
Is this the same with 6 speed manual subframe?
Thank you!
Is different.. different part number.
Custom mounts is the way to go then...

[sailaz]

no, is not the same. but I'm not sure how big difference is, I think I was reading somewhere that it can be used with small modification.. but once again, I might be mistaking, anyhow gearbox mounts will not fit because 5 speed is 016 type.
I have used subframe from v8 automatic, V8 441399153C bonded rubber mountings and custom made gearbox supports (mounts)