shifter selektor, 01a vs 01e

[maxiice]

I have swapped my 01a for a 01e in my 93 coupe, it was originaly a 01a in the coupe.

I have the 01e working ok, but not excellent i have fitted shfter linkage from rs2 of course, but i am thinking about the selector inside the car, my is very worn out and sousing a new one i was wondering if there are any different types or if any one will fit.

[90quattrocoupe]

The shifter base you are looking for is different on an 01E vs 01A. The reverse lockout is different as well as the bump stops. They are 4 & 5 in this picture.



8A0711334 ball housing

8A0711133 stop buffer

The B3 ball housing can be made to work, but will not work as well.

Greg W

[maxiice]

Ok thanks 90quattroqoupe

So my best option is to get the whole assembly from an S2 or RS2 with 01e ?

If i put a post in wanted, what do you call this assembly in good english ?

[GazzaG60]

you English is pretty good. don't worry.

6 speed shifter

[maxiice]

you English is pretty good. don't worry.

6 speed shifter

Ok thanks

I already got offered one from my add.

[mcandmar]

If you look at the bottom side of the mounting the reverse indent is a separate piece of metal spot welded on in four points. Just drill out the four spot welds then bolt the plate onto another assembly. I did exactly that to convert a 5speed unit to 6 speed.

[maxiice]

If you look at the bottom side of the mounting the reverse indent is a separate piece of metal spot welded on in four points. Just drill out the four spot welds then bolt the plate onto another assembly. I did exactly that to convert a 5speed unit to 6 speed.

Ok thanks tats a nice trick

My ball seat is worn also so must find something first.

Also the front ball bearing poppet out today while i was fiddling in the rear, so must fix that this to.