You can change the style the forum displays by selecting your preferred style at the bottom left of the site.
We have made an enhancement so that old threads should now link from search results to the correct thread. This is not yet in place for single post links
"Weak" front driveshafts from small motor saloon FWD or Quattro.
33 inner splines: 100mm inner CV originally but 108mm possible (VW T4/T5).
30 outer splines: originally small outer CV with 33 splines, 75mm bearing. Medium/large outer CV possible (audi 100 C4 with weak engines).
Lengths: 521 & 535mm.
Photos of Error404 from 'for sale' section, I hope he does not mind.
7A ACOQ rear shafts. They are shared across many non-turbo ACOQ-s (ABC,AAH,NG, NM) and 5-cyl 90 B3. 33 inner teeth. 30 outer teeth.
Aproximately 535 and 502mm from what can be seen on photo.
Sorry for bringing such an old thread back up but it’s very hard to find information on driveshaft length.
Does anybody have the length of S2 coupe rear shafts? I have a pair but the difference in length is more than I was expecting and I am having issues fitting them. My set up is far from stock so it might not be the shafts that are the issue. I was surprised how different they are compared to fronts which are much closer in length.
Spline count is different. Thickness is the same as 7A can vouch for that. Possibly 2.8 and 2.6 as well.
1990 2.2 20VT Audi Coupe Quattro
*Hx35/k26, MaxxECU, Wagner EM/IC *RS2 Recaro *4pot-Brembo *3" turboback *Treser *Koni/H&R
1990 Audi 200 20v Avant 2.2 20VT *7 Seater *Full electric gizmos
Rear driveshafts from Audi 80 B3 typ89 Quattro saloon with 4 cylinder engine. Partnumbers of shafts assemblies with joints should be 893501203H and 893501204H according to catalogs. The cat claims they are also from Audi Coupe Quattro typ89 KV/NG.
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment