Clutch master push rod

[newsh]

Is this bit still available ?

[LHD_Kid]

Is this bit still available ?

John..... John.... John.....

Can't you knock one up on the Myford without the damper?

I made one as a complete piece and have no issues....

[newsh]

Clutch master push rod

Er yeah
I'll get right in it [emoji51]

It's from my son's GF's cabby, AA man fixed it with a bit of studding to get her home which was pretty good I thought.

I would think the ball end is hardened though?

[Colesy]

Unfortunately the rod can't be bought separately from the MC.

[LHD_Kid]

Er yeah
I'll get right in it [emoji51]

It's from my son's GF's cabby, AA man fixed it with a bit of studding to get her home which was pretty good I thought.

I would think the ball end is hardened though?

Mine seems ok without hardening..... and is a pretty heavy clutch.... but you ccould always heat the ball end and cool in oil.... (don't heat the bell end though....)


Edit: post #7

http://www.s2forum.com/forum/showthread.php?t=78407&highlight=Clutch+rod

[newsh]

Clutch master push rod

I cut the damper off, threaded the rod and used a joiner nut to join to a piece of 8.8 threaded rod, turned a groove on the joiner to locate the boot. Only got a bit of fluid down my arm putting it in too ...

[LHD_Kid]

Nice.... and better than putting standard one in... even if new...

[newsh]

I really hate working upside down under the dash though!