hi. my name is alexander lindahl and im from sweden.
i bought my car 16years old, and now i am 17 years old.
im struggeling to get te car to be as good on track as possible.
my setup will look like this:
Engine:
bored
wiseco pistons
new bearings etc
new rods
ported head
new ex-valves
stiffer springs
titanium retainters
lightwight hydraulic lifters
7a exhaust cam
rs2 inlet cam
dahlbackracing adjusteble camsprocket
nuke performance fuelrail
fuellab FPR
bigger injectors/fuel lines and so on
wagner inlet manifold
huge ic (needed some cutting in the bumper )
homemade exhaust manifold
precision sc 61/sc62
VEMS
3" stainless steel (316l) exhaust without cat and 1 magnaflow muffler @rear
open wg pipe
Drivetrain/tracktion:
diffrent flywheel
sinterclutch
034motorsport hardest bushings for engine/ gearbox
alu bushings in subframes
rs2 front arb whiteline 19mm rear arb (will also build the piece between arb and strut housings with uniballs)
delring controlarms bushings
034motorsport hardest top mounts
bilsten and h&r´s or coilovers, depending on money
Exterior:
cuplippe
tinted front indicators
black 993 airinlets
black audi logo in front grille
driftworks towplate
tinted windows
white orgininal cup rims with toyo tires
removed audi logo/ windscreen wiper @ back
i have surely forgot something but i will update if i get something on my mind.
the project has already started and im waiting atm for the 1 set of things from powdercoat (subframes, arb )
i will attatch some pictures how it looked before i took it apart, and the progress.
how it looked before i took it apart.
cups, powdercoated
Exhaust
the new look on the frontend, the ic sticks under the bumper, looks brutal
it became a little hole.
i will update sometime under the weekend when i go there and take som pic´s i has nothing to do at all atm just waiting for parts.
i bought my car 16years old, and now i am 17 years old.
im struggeling to get te car to be as good on track as possible.
my setup will look like this:
Engine:
bored
wiseco pistons
new bearings etc
new rods
ported head
new ex-valves
stiffer springs
titanium retainters
lightwight hydraulic lifters
7a exhaust cam
rs2 inlet cam
dahlbackracing adjusteble camsprocket
nuke performance fuelrail
fuellab FPR
bigger injectors/fuel lines and so on
wagner inlet manifold
huge ic (needed some cutting in the bumper )
homemade exhaust manifold
precision sc 61/sc62
VEMS
3" stainless steel (316l) exhaust without cat and 1 magnaflow muffler @rear
open wg pipe
Drivetrain/tracktion:
diffrent flywheel
sinterclutch
034motorsport hardest bushings for engine/ gearbox
alu bushings in subframes
rs2 front arb whiteline 19mm rear arb (will also build the piece between arb and strut housings with uniballs)
delring controlarms bushings
034motorsport hardest top mounts
bilsten and h&r´s or coilovers, depending on money
Exterior:
cuplippe
tinted front indicators
black 993 airinlets
black audi logo in front grille
driftworks towplate
tinted windows
white orgininal cup rims with toyo tires
removed audi logo/ windscreen wiper @ back
i have surely forgot something but i will update if i get something on my mind.
the project has already started and im waiting atm for the 1 set of things from powdercoat (subframes, arb )
i will attatch some pictures how it looked before i took it apart, and the progress.
how it looked before i took it apart.
cups, powdercoated
Exhaust
the new look on the frontend, the ic sticks under the bumper, looks brutal
it became a little hole.
i will update sometime under the weekend when i go there and take som pic´s i has nothing to do at all atm just waiting for parts.
Comment